DoRevision
Edexcel GCSE Design and Technology

Edexcel GCSE Design and Technology past papers

This collection keeps Edexcel Design and Technology papers together so you can revise the right exam-board style and jump to related revision modules when they are available.

馃搫 117 papers 2019-2025

How the exam works

Skip to the papers

Edexcel GCSE Design and Technology (1DT0) is assessed in 2 parts. There are no tiers: everyone sits the same papers.

Component 1: Written exam

Time
1h 45m
Marks
100
Weighting
50%

Component 2: Non-Examined Assessment (NEA)

Marks
100
Weighting
50%

Taken from the published specification. Read the specification. Your school confirms which papers and tier you are entered for.

2025 June

Edexcel GCSE Design and Technology 1DT0/02 Paper 2 - June 2025

1DT0/02 路 Examiner report

2024 June

Edexcel GCSE Design and Technology 1DT0/02 Paper 2 - June 2024

1DT0/02 路 Examiner report

2023 June

Edexcel GCSE Design and Technology 1DT0/02 Paper 2 - June 2023

1DT0/02 路 Examiner report

2022 June

Edexcel GCSE Design and Technology 1DT0/02 Paper 2 - June 2022

1DT0/02 路 Examiner report

2021 November

Edexcel GCSE Design and Technology 1DT0/1A Paper 1 Paper 1A - November 2021

1DT0/1A 路 Mark scheme

Edexcel GCSE Design and Technology 1DT0/1B Paper 1 Paper 1B - November 2021

1DT0/1B 路 Mark scheme

Edexcel GCSE Design and Technology 1DT0/1C Paper 1 Paper 1C - November 2021

1DT0/1C 路 Mark scheme

2020 November

Edexcel GCSE Design and Technology 1DT0/1A Paper 1 Paper 1A - November 2020

1DT0/1A 路 Mark scheme

2019 June

Edexcel GCSE Design and Technology 1DT0/02 Paper 2 Paper 02 - June 2019

1DT0/02 路 Examiner report

Edexcel GCSE Design and Technology 1DT0/1A Paper 1 Paper 1A - June 2019

1DT0/1A 路 Mark scheme, Question paper

Edexcel GCSE Design and Technology 1DT0/1B Paper 1 Paper 1B - June 2019

1DT0/1B 路 Mark scheme, Question paper

Edexcel GCSE Design and Technology 1DT0/1C Paper 1 Paper 1C - June 2019

1DT0/1C 路 Mark scheme, Question paper

Edexcel GCSE Design and Technology 1DT0/1D Paper 1 Paper 1D - June 2019

1DT0/1D 路 Mark scheme, Question paper

Edexcel GCSE Design and Technology 1DT0/1E Paper 1 Paper 1E - June 2019

1DT0/1E 路 Mark scheme, Question paper

Edexcel GCSE Design and Technology 1DT0/1F Paper 1 (Foundation) - June 2019

1DT0/1F 路 Foundation 路 Mark scheme, Question paper

How to use these papers

Before you start. Work out which questions are recall and which ask you to justify a decision. The justification questions are where the marks concentrate, and they are hardest to revise for by reading.

While you work. Name the specific material, technique or component rather than describing it. Marks go to the precise term, and a description that avoids the word rarely gets there.

Marking it afterwards. Mark schemes accept a range of valid answers here, so check whether yours is on the list before deciding you were wrong. If it is not, work out what made the listed ones acceptable.

Warm up first. Ferrous and Non-Ferrous Metals is the shortest activity here, so it is the quickest way back into Design and Technology before you open a paper.

Revise this subject

Same subject and level, other exam boards

Schools enter the same subject with different boards, and the papers are not interchangeable. Check the code on your own paper before you revise from these.

Common questions

Are these Edexcel GCSE Design and Technology past papers free?

Yes. DoRevision links to official exam-board documents and keeps the revision page free to browse.

Can I use these for Year 10 and Year 11 mocks?

Yes. Past papers are useful for GCSE mocks, timed practice and checking answers against the mark scheme.